 |
 |
 |
|
Purchase together and save!
|
Tower
|
Hydro Wake Racks
|
Mirror
|
Big Air Bullet Speakers
|
Super Shadow Bimini in Black
|
|
H2O Tower
|
2
|
1
|
1 pair
|
1
|
Default options shown above. Upgrades are available.
Big Air H2O Wake Towers Key Specifications
- Quick Release Knobs!
- Legs - 2" OD 304 Stainless Steel Tubing
Top Cross Member - 2 3/8" OD 6061 T6 Al
Attachment hardware - Billet 6061-T6 Al
Attachment hardware - 18-8 Stainless Steel
- Brushed finish
- The Big Air H2O Tower can mount on the side or on the top of boat gunnels
- If you are looking to save a little money and are looking for a unique look, order one of our towers with a brush finish. The tower will be shipped to you ready to assemble, but with no powder coating. Many customers then choose to polish the tubing by hand to a near chrome finish. Note the tower will come totally functional, but will not be polished.
- Front legs remove easily once the tower is laid down so the tower can fit into your garage while still attached to the boat.
- Lays down in one minute & legs remove for storage or low clearance.
- The tower can be laid down and the front legs removed in less than 1 minute.
- Most biminis fit under our towers.
- Swivel Joint attachments on the base plates prevent stress cracking to your boats fiberglass. Many towers use a rigid mount, that delivers stress and flexure directly into your boats hull. This causes cracking and fatigue of the fiberglass. Our unique swivel system keeps the stress and flexure where it belongs, IN the tower.
- 5 year limited warranty.
- The tower is made to fit nearly all boats. This is made possible by our unique H-member cross brace system.
- Tower stands 5' alone. Designed to have an approximate height of 7' 3" depending on boat style.
- Our towers are also great for barefoot skiing. Our tower is great for long line work with either frontwards skiing or backwards skiing. The same benefits derived by wakeboarders (the upward pull) really helps out in barefooting as well.
- Mounting hardware and backing plates are included.
Big Air Kicker Bullet speakers
1 pair (Qty: 2 separate speakers)
High polish or black powder coat speaker housings
- Kicker 6130 speakers
- Fits 2.0-2.5” diameter towers
- Made of quality 6061 aircraft aluminum
- Pre-wired and ready for installation
- Easy to install
- Magnetically shielded
- Smooth, balanced sound
- Santoprene surrounds
- Cone and surround co-molded as single part
- All connections are marine industry compliant and sealed
- Coaxials install as a single unit with attached grilles
SPEAKER SPECS:
- Woofer: 6 Inches
- Tweeter: 1/2 Inch
- Impedance: 4 Ohms
- Power Handling: 65 RMS
- 195 Watts Peak Power Rating
- Sensitivity: 90 dB
- Frequency Response: 35Hz to 21kHz
Hydro Wake Racks
- Fits 2", 2.25", and 2.5" tubing sizes
- Bungee straps for securing boards
- Holds two boards
- Billet aluminum construction
- Fully adjustable
- Fully polished or black powder coat finish
- Rubber inserts to protect your high end wakeboards
Mirror
- Polished Aluminum Arms
- Center pivot allows you to position the mirror for the best viewing (Note: Most single arm mirrors don't work right on towers)
- Tournament CONVEX Mirror 7" x 13"
- Stainless Steel Fasteners
Super Shadow Bimini
|
|
|
 |
|
 |
|